Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
Network Adapter Interface
A network adapter provides the physical interface, or connector, and the hardware to let a
computer access a network. A network adapter is also called an adapter card, a network
interface card (NIC), or simply a card.
From the Interfaces page of the server appliance Web UI, you can perform one of the
following tasks:
Change the name of the connection.
n
Set or change the Internet Protocol (IP) addresses, gateway addresses, subnet masks, and
n
metrics.
Set or change how the server appliance resolves DNS names.
n
Set or change the configuration of the Windows Internet Naming Service (WINS)
n
clients.
Configure AppleTalk, if enabled by your server appliance manufacturer.
n
Configuring a Network Adapter
To configure a network adapter
1.
Select the adapter you want from the Description column.
2.
Select the task you want from the Tasks list.
3.
On the Task page, use the tabs in the left pane to display the configuration of the
network adapter you chose.
Chapter #5 - O/S 2.0 - Network Configuration
11/07/01 -- Revision 2.0.03A
Related Topics
•
IP Address Configuration
•
DNS Configuration
•
WINS Configuration
•
Initial NAS Server Appliance Configuration
•
Initial Web Server Appliance Configuration
Chapter #5 - O/S 2.0 - Network Configuration
145
Network Adapter Interface
000001628
Advertisement
Table of Contents
