MaxAttach NAS 6000 Administration Guide
7.
On the Edit NFS Client Group page, select the IP address or computer name of
the member to remove from the group.
8.
Choose Remove.
9.
Choose OK.
Removing NFS Client Groups
To remove an NFS client group
1.
On the primary navigation bar, choose Shares.
2.
Choose Sharing Protocols.
3.
Select NFS Protocol, and then choose Properties.
4.
Choose Client Groups.
5.
Select the NFS Client Group(s) you want to remove.
6.
In the Tasks list, choose Delete.
7.
On the Delete NFS Client Group page, choose OK.
Setting NFS Locks
NFS locks allow a process to have exclusive access to all or part of a file. File locking is
implemented both on the server appliance and the client. When a file is locked, the buffer
cache is not used for that file, and each write request is immediately sent to the server.
Chapter #8 - O/S 2.0 - Folders and Shares
11/07/01 -- Revision 2.0.03A
Related Topics
•
Adding NFS Client Groups
•
Removing NFS Client Groups
Related Topics
•
Adding NFS Client Groups
•
Editing NFS Client Groups
Chapter #8 - O/S 2.0 - Folders and Shares
209
NFS Sharing Protocol
000001628