Table of Contents
Advertisement
Chapter #14 - Appendix - Disk
Error Codes Overview
A full list of Error Codes, descriptions, and severity levels can be obtained by opening and
reading the EVENTDEF.TXT file inside the folder C:\ GAM on the Base Unit.
This information is also available in below in Table #1 - Mylex Error Codes. The table
displays error descriptions and related messages from the Mylex RAID Controller Card.
Mylex Severity Levels
The Severity Levels are defined by default as follows:
Critical (0)
n
Serious (1)
n
Error (2)
n
Warning (3)
n
Informational (4)
n
O/S Error Processing
The O/S processes the Mylex Errors based on instructions located in the
SupportedEvents.Inf
amber Drive Status LED.
Revision 2.0.03A - 11/07/01
Array Error Codes
file. This file instructs the system when to turn on and off the
280
MaxAttach NAS 6000
000001628
Advertisement
Table of Contents
