Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
Permissions list will have over files on the server appliance.
Users may have no control, read-only access, change access, change and read
n
access, or full control.
5.
Use the Deny list to deny a level of control to the selected users and groups in the
Permissions list.
6.
To remove a user or group from the Permissions list, select the user or group in the
list, and then choose Remove.
7.
Choose OK.
Setting NFS Share Properties
Use this page to specify which NFS clients are granted access to each share. Access can be
granted or denied on the basis of client host name. Access can also be granted or denied on
the basis of client groups, where a client group contains one or more client host names.
To add a new NFS client or client group to a share
1.
Create a new client group as described in Adding NFS Client Groups.
2.
Follow the steps described in the following procedure to add an existing client or
client group.
To add an existing NFS client or client group
1.
On the primary navigation bar, choose Shares.
2.
On the Shares page, choose Shares.
3.
Select the share for which you want to add an NFS client or client group.
4.
In the Tasks list, choose Properties.
5.
Select the General tab.
6.
Select the Unix (NFS) check box.
7.
Select the NFS Sharing tab.
8.
Select the desired machine or group from the list on the left, or type an NFS client
computer name or IP address in the box on the right, and then choose Add.
9.
Select the degree of control the specified client can exercise over files in the share
Chapter #8 - O/S 2.0 - Folders and Shares
11/07/01 -- Revision 2.0.03A
Chapter #8 - O/S 2.0 - Folders and Shares
199
Managing Shares
000001628
Advertisement
Table of Contents
