MaxAttach NAS 6000 Administration Guide
In the DNS client-server model, the server containing information about a portion of the
DNS database, the portion that makes computer names available to clients, queries for
name resolution across the Internet.
Obtaining IP Address from DHCP Server
To set the server appliance to automatically obtain DNS server
information from a DHCP server
1.
On the primary navigation bar, choose Network.
2.
Choose Interfaces.
3.
Select the network connection you want to modify.
4.
In the Tasks list, choose DNS.
5.
Select the Obtain configuration from DHCP server button.
6.
Choose OK.
Manually Setting DNS Server to Use
To manually set the DNS servers to be used by the server appliance
1.
On the Network page, choose Interfaces.
2.
Select the network connection you want to modify.
3.
In the Tasks list, choose DNS.
4.
Select the Configure manually button.
5.
Type the appropriate IP address in the box next to the Add button, and then choose
Add.
6.
To add another DNS server, repeat step 5.
7.
When you are finished adding DNS servers, choose OK.
Chapter #5 - O/S 2.0 - Network Configuration
11/07/01 -- Revision 2.0.03A
Chapter #5 - O/S 2.0 - Network Configuration
150
DNS Configuration
000001628