Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
Interfaces: Configure the properties of each network adapter on the server appliance.
n
Administrator: Change the password of the user account you are using to access the
n
server appliance administration Web site.
Administration Web Site: Specify which IP address(es) and port are used to access
n
the administration Web site.
Telnet: Configure Telnet to administer the server appliance.
n
Network Identification
The server appliance must be given a name. Client computers use this name to access the
file shares that reside on this server appliance.
The server appliance can be configured as a member of one of the following groups:
Microsoft® Windows NT® 4 domain
n
Microsoft Active Directory™ domain
n
Workgroup
n
If no workgroups exist on the network, for example, if this is a UNIX environment, the
workgroups option should be selected and any arbitrary name used.
User accounts may also be created locally on the server appliance; however, using a domain
or directory eliminates the need to create local user accounts for every user of the server
appliance.
A good practice after joining a domain is to add one or more domain users to the local
administrators group, then reconnect under those user names to administer the server
appliance.
To set the name and domain membership of the server appliance
1.
On the primary navigation bar, choose Network.
2.
Choose Identification.
3.
In the boxes provided, type the appropriate server appliance name and Domain
Name System (DNS) suffix. The DNS suffix is appended to the host name to create
the fully qualified machine name.
Chapter #5 - O/S 2.0 - Network Configuration
11/07/01 -- Revision 2.0.03A
Chapter #5 - O/S 2.0 - Network Configuration
132
Network Identification
000001628
Advertisement
Table of Contents
