Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
Do not remove or change any system software that was provided with the server by Maxtor unless
directed to do so by Maxtor Customer Support.
To remove a program
1.
Using Internet Explorer, log in to the MaxAttach NAS 6000 as administrator.
2.
Click Maintenance.
3.
Select Add/Remove Programs. This opens a terminal services session.
4.
Log in to Windows 2000. The Add/Remove Programs dialog box displays.
5.
Select the program you want to remove from the list. Note: do not remove system
programs provided by Maxtor unless directed to do so by Maxtor Customer Support.
6.
Click the Change/Remove button for the chosen program.
7.
The Add/Remove applet removes the program. Follow the on screen instructions to
complete your task.
To add a program or driver
1.
From Internet Explorer, log in to your MaxAttach NAS 6000 as administrator.
2.
Create a share on a convenient drive. This share will hold your new software (when
creating the share, check to see if there is enough disk space to hold the contents of
the new software). For convenience, you can map this share to a drive on your client
machine.
3.
On your client machine, insert the new program's CD or floppy into the appropriate
drive.
4.
Copy the contents of the CD or floppy to the share you created on the MaxAttach.
5.
Using Internet Explorer, log in to the MaxAttach as administrator.
6.
Click Maintenance on the main menu bar.
7.
Select Terminal Services. This starts a terminal services session.
8.
Log in to Windows 2000.
Chapter #10 - O/S 2.0 - Maintenance
11/07/01 -- Revision 2.0.03A
NOTE
235
Chapter #10 - O/S 2.0 - Maintenance
Add or Remove Programs
000001628
Advertisement
Table of Contents
