Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
Gam_ev
User_ev
Priority
ent
ent
Number
Number
Number
138
138
4
139
139
4
140
140
4
141
141
2
142
142
2
143
143
2
144
144
4
145
145
4
146
146
4
147
147
2
148
148
4
149
149
4
150
150
4
151
151
4
152
152
2
153
153
4
154
154
4
155
155
4
156
156
1
157
157
3
158
158
1
159
159
2
160
160
2
161
161
2
162
162
4
Chapter #14 - Appendix - Disk Array Error Codes
11/07/01 -- Revision 2.0.03A
Table #1 - Mylex Error Codes (Sheet 4 of 8)
Severity
Level
Information
A rebuild has started on logical drive.
Information
Rebuild on logical drive is over.
Information
Rebuild on logical drive is cancelled.
Error
Rebuild stopped with error.
Error
Rebuild stopped with error. New device failed.
Error
Rebuild stopped because logical drive failed.
Information
Logical drive initialization started.
Information
Logical drive initialization done.
Information
Logical drive initialization cancelled.
Error
Logical drive initialization failed.
Information
A logical drive has been found.
Information
A logical drive has been deleted.
Information
Expand Capacity Started.
Information
Expand Capacity Completed.
Error
Expand Capacity stopped with error.
Information
Bad Blocks found.
Information
System drive size changed.
Information
System drive type changed.
Serious
Bad data blocks found. Possible data loss.
Warning
System drive LUN mapping has been written to config.
Serious
Attempt to read data from block that is marked in Bad Data Table
Error
Data for Disk Block has been lost due to Logical Drive problem
Error
Temporary-Offline RAID5/RAID3 array is available to the user again with the
possibility of data loss in the array.
Error
Temporary-Offline RAID0+1/RAID1/RAID0/JBOD array is available to the user
again.
Information
An standby rebuild has started on logical drive.
Chapter #14 - Appendix - Disk Array Error Codes
Description
286
Mylex Error Codes Table
000001628
Advertisement
Table of Contents
