Erasing The Operation History - Tascam DP-004 Owner's Manual

6–Basic Recording

Erasing the operation history

When the power is turned OFF, the operation history
of the currently loaded song is erased (cleared). The
operation history is not restored, so past operations
cannot be undone or redone when the power is
turned ON again.
NOTE
The operation histories of songs that are not loaded are
not erased when the power is turned OFF.
You can also erase (clear) the operation history
of the currently loaded song without turning the
power OFF.
1 Press the key while pressing and holding
UN/REDO
the stop (ª) key to open the
2 Press the key. A confirmation message
F4 ( )
CLEAR
appears.
3 Press the key. A confirmation message
F3 ( )
YES
appears again.
4 Press the key to clear the operation history
F3 ( )
YES
and erase unused data. The Home Screen reopens
when this operation completes.
68
TASCAM DP-004
screen.
HISTORY
To cancel erasing the operation history, press the
•
key instead of the
( )
NO
TIP
• If you open the HISTORY screen immediately after
erasing the operation history, the event (operation)
that appears is "0" (START UP), showing that the
operation history has been cleared.
• If you want to keep the operation history even when
you power OFF, turn song protect ON before turning
the power OFF (see "Protecting songs" on page 53).
CAUTION
You cannot undo erasing the operation history! Only
do it if you are certain about it.
key.
F3 (
)
YES
F4