Copy Control - Xerox 4590 System Administration Manual

Copy Control

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
The options here allow you to select the default settings that relate
to the copy operation, such as Auto Paper, Original Type,
Output Orientation, and many more. To select the default
settings for the various Copy Control options, perform the
following steps:
1. From the Copy Mode Settings screen, select Copy Control.
Select a Copy Control item to be set or changed, and select
2.
Change Settings.
NOTE 1: Select s to display the previous screen and select t to
display the next screen.
NOTE 2: Each of the items shown in the above illustration is
discussed on the following pages.
3. Select the desired setting for that item.
Select Save; you are returned to the Copy Control screen.
4.
Repeat Steps 1-4 until you have selected the desired setting
5.
for each Copy Control item.
Select Close to return to the Copy Mode Settings screen.
6.
8 . S e t ups
8-103