Xerox 4590 System Administration Manual page 187

8 . S e t ups
Select the volume level that sounds when there is an error
Fault Tone
termination. Select from Loud, Normal, and Soft. To disable the
sound, select Off.
Select the volume level that sounds when the automatic clear
Auto Clear Alert Tone
feature is enabled and it is 5 seconds before the machine
automatically returns to the initial screen. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when a fault, such as a paper
Alert Tone
jam occurs, and the fault is left unattended. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when there is no paper in the
Out of Paper Warning Tone
paper tray and the job is left unattended. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when it is time to replace the
Low Toner Alert Tone
drum toner cartridge. Select from Loud, Normal, and Low. To
disable the sound, select Off.
Select the volume level that sounds while the machine is records a
Stored Programming Tone
job into the job memory. Select from Loud, Normal, and Soft.
NOTE: It is not possible to disable this sound.
X er o x 4 5 90 / 4110 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
8-29