Auto Job Promotion - Xerox 4590 System Administration Manual

8. S e tu ps
8- 6 4
Use the following procedure to access the Other Settings feature.
From the Common Settings screen, select Other Settings.
1.
Select the item to be set or changed, and select Change
2.
Settings.
NOTE: Select
to display the next screen.
Select the default setting.
3.
Select Save; you are returned to the Other Settings screen.
4.
Repeat Steps 1-4 for the selecting the default setting for any
5.
additional desired Other Settings items.
Select Close to return to the Common Settings screen.
6.
Select Close to return to the System Settings screen.
7.

Auto Job Promotion

This Other Settings option allows you set the machine to
automatically promote a job for printing/copying if the machine is
unable to start a prior job. For example, the machine is unable to
start an operation because there is no paper in the tray (at the
start of a copy or print operation). If this feature is enabled, then
the machine can bypass the current job and allows other jobs to
start.
KEY POINT: The other jobs must not have the same copy/print
requirements as the faulted job. If other jobs have different
copy/print requirements, then these other jobs can be promoted
and copied/printed.
NOTE: Stored documents such as secure prints and sample prints
are excluded and cannot be automatically promoted.
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e
to display the previous screen and select