Xerox 4590 System Administration Manual page 74

3. U s i ng C e nt r eWa r e I nt er n e t S er v i c e s
3- 2 6
Set the print method using the Auto Print Delivery
11.
Confirmation Mail pull-down menu.
NOTE: Set this item when using the mail print feature.
Select the Enable checkbox to enable the Auto Print Error.
12.
Set the Maximum E-mail Size. Set the number of pages
13.
when dividing the mail transmission.
NOTE: Set this item when using the scanner (mail
transmission).
Select the Enable checkbox to enable the Response to Read
14.
Status (MDN).
NOTE: Set this item when using the mail print feature.
Set the POP3 server information.
15.
NOTE: Set this item when using the mail print feature and
POP3 is specified for the Receive Protocol.
a. Set the POP3 Server Address, POP3 Port Number, and
POP Receiving Authentication.
b. Set the POP3 Server Check Interval.
c. Set the POP User Name.
d. Enter the POP User Password.
Set the SMTP Server Address.
16.
NOTE: Set this item when using the scanner (mail
transmission), mail notice, or job completion notice feature.
Set the SMTP Port Number.
17.
Set the authentication method using the SMTP Send
18.
Authentication pull-down menu.
NOTE: Set this item when using the scanner (mail
transmission), mail notice, or job completion notice feature.
The setting is not necessary for pop receiving.
Set the SMTP Authentication User.
19.
Set this item when using the scanner (mail transmission), mail
20.
notice, or job completion notice feature. The setting is not
necessary for pop receiving.
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e