Auto Power Saver - Xerox 4590 System Administration Manual

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e

Auto Power Saver

In power saving mode, there is a "low-power mode" and a "sleep
mode," and when the set time has elapsed, these modes are
switched to in the following way, thus reducing the power
consumption.
Last operation on the machine
1. From the Machine Clock/Timers screen, select Auto Power
Saver, and select Change Settings.
Set low-power mode and sleep mode.
2.
From Last Selection to Low Power Mode: Set the time
•
to go from last operation to low-power mode. Set the time
from 1 to 240 minutes, in 1 minute increments.
NOTE: Set the time From Last Operation to Low-power
Mode not to exceed the time From Last Operation to Sleep
Mode.
• From Last Selection to Sleep mode: Set the time to go
from last operation to sleep mode from 1 to 240 minutes, in
1 minute increments.
8 . S e t ups
Low-power mode Sleep mode
8-25