Xerox 4590 System Administration Manual page 106

5. U s i ng t h e S c an S e r v i ce
When setting a password:
When not setting a
password
Mailbox name
Check password
5- 1 4
• Select Yes.
• Enter the password using the numeric keypad then select
Save.
The Mailbox XXX - Create/Delete screen is displayed.
XXX indicates the mailbox number to register.
NOTE: The password entered is displayed as "*." If you
make a mistake while entering the password, press the C
(Clear) button and enter the password again.
• Select No and then select Save.
The Mailbox XXX - Create/Delete screen is displayed.
XXX indicates the mailbox number to register.
Configure other items as necessary. Select an item to
6.
configure and select Change Settings. When the setting is
completed, select Save.
Set the name used for a mailbox. Up to 10 characters can be
entered.
NOTE: The buttons on the Control Panel can also be used for
the entry.
When the password is set, configure whether each operation
(such as read or write) requires password restrictions.
• Save (write)
A password entry is required when selecting a mailbox.
• Print/delete (read)
A password entry is required when printing or deleting a
document in a mailbox.
• Always
A password is required for both the above operations.
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e