Initialize Hard Disk - Xerox 4590 System Administration Manual

8. S e tu ps
8- 6 0
Follow the instructions provided on the screen for carrying out
3.
a specific function.
Step-by-step instructions are provided for the Initialize Hard
Disk procedure; refer to Initialize Hard Disk on page 8-60.
Select Close to return to the Maintenance screen.
4.
Select Close to return to the Common Settings screen.
5.

Initialize Hard Disk

This procedure initializes the hard disk. The data erased by
formatting includes additional fonts, ESC/P, HP-GL/2, and SMB
folder.
KEY POINT: The secure print document log is not erased.
From the Maintenance screen, select Initialize Hard Disk.
1.
Select the partition to be reformatted and select Start.
2.
Select Yes.
3.
When reformatting completes successfully, the message
4.
screen appears, select Confirm.
5. Select Close to return to the Maintenance screen.
Select Close to return to the Common Settings screen.
6.
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e