4. E - m a i l
Configuring the E-mail environment
If
SMTP
has been selected
for the
E-mail Receiving
Protocol
4- 6
This section describes the configuration procedure to use the e-
mail feature.
NOTE 1: The configuration can also be performed using
CentreWare Internet Services.
NOTE 2: Enable the SOAP port and the SNMP port in most cases.
Refer to "Using CentreWare Internet Services" on page 3-1.
1.
Display the System Administrator Menu screen.
a. Press the Log In/Out button.
b. Enter the UserID using the numeric keypad and select
Confirm.
NOTE: The default User ID value is 11111. When using the
Authentication feature, a password is required. The default
password is x-admin.
c. Select System Settings.
Set the e-mail address, host name, and domain name.
2.
a. Select System Settings.
b. Select Network Settings.
c. Select Machine E-mail Address/Host Name.
d. Select E-mail Address and then select Change Settings.
e. Enter the E-mail Address using the keyboard displayed.
f.
Select Save.
g. Set the Host Name and Domain Name as above.
h. Select Close.
•
Alias cannot be configured. User can decide the account
(the left side of @ mark). The address (the right side of @
mark) is a combination of host name and domain name.
•
Example: mymail@mycompany.com
–
Account name: mymail
–
Host name: host
–
Domain name: mycompany.com
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e