Xerox 4590 System Administration Manual page 304

8. S e tu ps
Secondary Server Port
Number
Login Name
Password
Search Root Entry DN
Scope of Search from Root
Object Class of Search
Server Application
Attribute Type of Recipient
8- 1 4 6
• Secondary Server Name: Select the server name for the
secondary server. A maximum of 64 characters may be
used.
NOTE: Use this feature when the Secondary Server
Setup setting is By Server Name.
Select Save; you are returned to the Secondary Server
4.
screen.
Repeat Steps 1-4 for the remaining items.
5.
From the Secondary Server screen, select Close to return to
6.
the Address Search (Directory Service) screen.
Select the directory server (secondary server) port number in the
range of 1-65535.
Select the login name for accessing to the directory server. A
maximum of 256 characters may be used.
KEY POINT: Set this only when authentication is required for the
directory service. Do not select a setting the Login Name when
authentication is not required.
Select a password for accessing to the directory server. A
maximum of 32 characters may be used.
KEY POINT: Set this only when authentication is required for the
directory service. Do not select a setting the Login Name when
authentication is not required.
Enter the search root character string; a maximum of 256
characters may be used.
Select the default search range from the search root.
Entry
• Root entry only: Searches the root level only.
• One level below root entry only: Searches from the root
and one level below the root.
• All levels below root entry: Searches from the root including
all levels below root.
Enter the search target object classes; a maximum of 32
characters may be used.
Target
Select the software used for the directory server; select one of the
following: Microsoft Active Directory, Novell NetWare 5.*, or
Other Applications.
Select the recipient name attribute type. A maximum of 32
characters may be entered.
Name
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e