Xerox 4590 System Administration Manual page 90

4. E - m a i l
4- 8
NOTE 3: When you would like to move to the next value
without entering all 3 digits, select Save/Select Next.
–
POP3 Server - Server Name
Enter if By IP Address has been selected for
POP3 Server - Setup.
–
POP3 Server - Port Number
Enter a value in the range from 1 to 65535.
–
POP3 Server - Server Check Interval
Set the interval for checking the e-mail on the
POP3 server.
–
POP3 Server - Server Name
Enter the name to login to the POP3 server.
–
POP3 Password
Enter the same password twice in the New
Password and Confirm Password. If you do not
wish to set the password, leave it blank and select
Save.
–
POP3 Password Encryption
Select ON(APOP) to encrypt the password.
– Select Save and then select Close.
Configure the mail transmission
4.
• Select SMTP Server Settings and then set the following
items for the SMTP server.
–
SMTP Server - Setup
Select from By IP Address or By Server Name.
–
SMTP Server - IP Address
Enter if By IP Address has been selected for POP3
Server - Setup.
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e