Xerox 4590 System Administration Manual page 292

8. S e tu ps
Original Orientation
Scan Resolution
Mixed Size Originals
Edge Erase
Edge Erase - Top & Bottom
Edges
Edge Erase - Left & Right
Center Erase/Binding
8- 1 3 4
Select the default value for Original Orientation position of
originals when scanning. Select either Head to Top (
Head to Left (
Select the default value for Scan Resolution in the Scan Options
screen. Select one of the following: 200 dpi, 300 dpi, 400 dpi, or
600 dpi.
Select the default value for Mixed Size Originals (as displayed on
the Scan Options screen). Select either Off or On.
Select the default value for Edge Erase (as displayed on the Scan
Options screen). Select either Normal or Edge Erase.
Select the default value for the amount of edge erased from the
original in the top and bottom directions in Edge Erase (as
displayed on the Scan Options screen). Select a value between
0-50 mm, 1 mm increments.
Select the default value for the amount of edge erased from the
original in the left and right directions in Edge Erase (as displayed
on the Scan Options screen). Select a value between 0-50 mm,
in 1 mm increments.
Select the default value for the center erase amount of the original
in Edge Erase/Binding Erase (as displayed on the Scan
Erase
Options screen). Select a value between 0-50 mm, in 1 mm
increments.
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e
).
) or