Scan Defaults - Xerox 4590 System Administration Manual

8. S e tu ps
Feature in 2nd Column
Reduce/Enlarge - Button 2
Reduce/Enlarge - Button 3

Scan Defaults

8- 1 3 2
Select which features are shown in the second column of the
Basic Scanning Tab screen. Select 2 Sided Originals, Scan
Resolution, or Reduce/Enlarge.
Select a specific, default magnification level for the
Reduce/Enlarge button. This button is displayed when
Reduce/Enlarge is selected in Feature in 2nd Column.
Select a specific, default magnification level for the
Reduce/Enlarge button. This button is displayed when
Reduce/Enlarge is selected in Feature in 2nd Column.
For information about R/E Preset buttons, refer to Reduce/Enlarge
Presets on page 8-114.
In Scan Defaults, you select the default values for the scanner
feature. When one of the following occurs, the machine returns to
its preset scan defaults:
• The machine power is switched on,
• The machine returns from a power-saving mode, or
• The Clear All button is pressed.
The settings selected for Scan Defaults are valid after switching
off and switching on the machine's power.
1. From the Scan Mode Settings screen, select Scan Defaults.
NOTE: If you have the optional color scanner, some of the
selections will be different as noted below.
Select the item to be set or changed, and select Change
2.
Settings.
NOTE: Select s to display the previous screen and select t to
display the next screen.
3. Select the default setting for that item.
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e