Authentication System; Remote Authentication Server 1 Through 5 - Xerox 4590 System Administration Manual

Copier/printer system
Hide thumbs Also See for Xerox 4590:
Table of Contents

Advertisement

Server - Server Setup
Server - IP Address
Server - Server Name
Server - Port Number
Server - Realm Name
X er o x 4 5 90 / 4110 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e

Authentication System

You can select the system for authentication from Kebros
(Windows2000) or Kebros (Solaris).

Remote Authentication Server 1 through 5

Makes the remote authentication server settings.
You can select the remote authentication server specification
method from By IP Address and By Server name.
You can set the IP address of the remote authentication server
using the values from 0 to 255.
NOTE: You can set a server IP address when Server - Server
Setup is set to By IP Address. 244.XXX.XXX.XXX to
255.XXX.XXX.XXX and 127.XXX.XXX.XXX cannot be set.
You can set the name of the remote authentication server. Up to
255 characters can be entered.
NOTE: You can set a server name when Remote - Server Setup
is set to By Server Name.
You can set the port number of the remote authentication server
either as 88 or within the range of 1 to 65535.
You can set the realm name of the remote authentication server.
Up to 64 characters can be entered.
KEY POINT: A realm name must be entered in capital letters. If
the name is entered in lower-case letters, an authentication error
occurs.
8 . S e t ups
8-121

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xerox 4110

Table of Contents