System Administrator Password - Xerox 4590 System Administration Manual

8. S e tu ps

System Administrator Password

8- 1 7 6
Set the password for System Administration mode.
KEY POINT: This is recommended for stronger security.
NOTE: The default setting of the system administrator password
is x-admin.
The System Administrator Password appears in the Login
Setup/Auditron Administration operation after Yes is selected
for using a password. Set the password after setting the system
administrator UserID. The password can be from 4-12 numeric
digits.
For more about enabling and disabling passwords, refer to Login
Setup/Auditron Administration on page 8-178.
Select System Administrator Password.
1.
Select Keypad.
2.
Select Keyboard to enter the new password from 4-12
3.
numeric digits in New Password, and select Next.
In Re-enter Password, enter the same password, and select
4.
Save.
NOTE: To set no password, leave the password blank, and
select Save.
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e