Copy Control - Xerox DocuColor 3535 User Manual

Copy Control

Auto Paper Off
Memory Full Procedure
Maximum Stored Pages
Xerox DocuColor 3535 Printer/Copier
This is the setting for Copy Control.
The following items can be set in Copy Control.
Set which tray will be selected when Auto % or Independent X-Y
Auto is selected in Reduce/Enlarge when Auto is selected in
Paper Supply, on the Basic Copying screen.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 1, Select Tray 1.
Setting
1
2
3
4
Set the processing method when the hard disk runs out of memory
during a job.
Enter the setting on the Numeric Keypad using the numbers listed
in the following table. The default is 0, Disable.
Setting
0
1
This determines the maximum number of stored pages when
copying documents. It can be set from 1 to 999 pages.
Enter the number of the pages using the numeric keypad on the
Control Panel. The default is 999.
Description
Select Tray 1
Select Tray 2
Select Tray 3
Select Tray 4
Description
Disable (Discard stored
documents)
Enables stored data
4 – 41