Server Configuration Screen - ZyXEL Communications Vantage Report User Manual

Chapter 14 System Setting
For Windows XP/Vista/7, select the Default NetBIOS setting and click OK.
6
For Windows 2000, select Use NetBIOS setting from the DHCP server and
click OK.
Click OK (and Close) to close the previously opened windows.
7
Turn on your ZyXEL device and restart your computer (if prompted).
8

14.2 Server Configuration Screen

Note: Only the root account or accounts in the 'super' group can open this screen.
Use the Server Configuration screen to set up mail server and web server
configuration for Vantage Report. See
information. Click System Setting > Server Configuration to open the Server
Configuration screen.
Figure 263 System Setting > Server Configuration
Each field is described in the following table.
Table 241 System Setting > Server Configuration
LABEL
Mail Server
Configuration
SMTP IP Address
or Domain Name
Sender E-mails
554
Section 2.2 on page 24
DESCRIPTION
Use this part of the screen to set up the SMTP mail server that
Vantage Report uses for notifications and scheduled reports.
Enter the IP address or domain name of the SMTP mail server on
which Vantage Report has an account to send e-mail messages.
Enter the complete e-mail address for the Vantage Report account.
for more
Vantage Report User's Guide