ZyXEL Communications Vantage Report User Manual page 629

Table 283 Connectivity Check Logs (continued)
LOG MESSAGE
Can't get flags of %s
interface
Can't get remote
address of %s
interface
Can't get NETMASK
address of %s
interface
Can't get BROADCAST
address of %s
interface
Can't use MULTICAST IP
for destination
The destination is
invalid, because
destination IP is
broadcast IP
Can't get MAC address
of %s interface!
To send ARP REQUEST
error!
The %s routing status
seted to DEAD by
connectivity-check
The %s routing status
seted ACTIVATE by
connectivity-check
Table 284 Device HA Logs
LOG MESSAGE
Device HA VRRP Group
%s has been added.
Device HA VRRP group
%s has been modified.
Device HA VRRP group
%s has been deleted.
Vantage Report User's Guide
Appendix B ZyWALL USG Series and ZyWALL 1050 Log Descriptions
DESCRIPTION
The connectivity check process can't get interface
configuration.
%s: interface name
The connectivity check process can't get remote address of
PPP interface
%s: interface name
The connectivity check process can't get netmask address of
interface.
%s: interface name
The connectivity check process can't get broadcast address of
interface
%s: interface name
The connectivity check process can't use multicast address to
check link-status.
The connectivity check process can't use broadcast address to
check link-status.
The connectivity check process can't get MAC address of
interface.
%s: interface name
The connectivity check process can't send ARP request packet.
The interface routing can't forward packet.
%s: interface name
The interface routing can forward packet.
%s: interface name
DESCRIPTION
An VRRP group has been created, %s: the name of VRRP
group.
An VRRP group has been modified, %s: the name of VRRP
group.
An VRRP group has been deleted, %s: the name of VRRP
group.
629