ZyXEL Communications Vantage Report User Manual page 615

User guide
Hide thumbs Also See for Vantage Report:
Table of Contents

Advertisement

Table 276 IKE Logs (continued)
LOG MESSAGE
IKE Packet Retransmit
Phase 1 IKE SA process
done
Recv Main Mode request
from [%s]
Recv Aggressive Mode
request from [%s]
Recv DPD request from
"%s:%s"
Recv DPD response from
"%s:%s"
Recv:[SA]%s[KE]%s[ID]%
s[CERT]%s[CR]%s[HASH]%
s[SIG]%s[NONCE]%s[DEL]
%s[VID]%s[ATTR]%s
Send Main Mode request
to [%s]
Send Aggressive Mode
request to [%s]
Send DPD request to
"%s:%s"
Send DPD response to
"%s:%s"
Send:[ID]%s[SA]%s[KE]%
s[ID]%s[CERT]%s[CR]%s[
HASH]%s[SIG]%s[NONCE]%
s[DEL]%s[VID]%s[ATTR]%
s[
Start Phase 2: Quick
Mode
The cookie pair is :
0x%08x%08x /
0x%08x%08x
The IPSec tunnel "%s"
is already established
Tunnel [%s] built
successfully
Tunnel [%s] Phase 1
pre-shared key
mismatch
Tunnel [%s] Recving
IKE request
Tunnel [%s] Sending
IKE request
Vantage Report User's Guide
Appendix B ZyWALL USG Series and ZyWALL 1050 Log Descriptions
DESCRIPTION
When retransmitting the IKE packets.
When Phase 1 negotiation is complete.
%s is the remote name; When receiving a request to enter
Main mode.
%s is the remote name; When receiving a request to enter
Aggressive mode.
%s:%s is peer IP:Port. The device received a Dead Peer
Detection request.
%s:%s is peer IP:Port. The device received a Dead Peer
Detection response.
This is a combined message for incoming IKE packets.
%s is the remote name. The device sent a request to enter
Main Mode.
%s is the remote name. The device sent a request to enter
Aggressive Mode.
%s:%s is peer IP:Port. The device sent a Dead Peer Detection
request to the peer.
%s:%s is peer IP:Port. The device sent a DPD response sent
to the peer.
This is a combined message for outgoing IKE packets.
Indicates the beginning of phase 2 using quick mode.
Indicates the initiator/responder cookie pair.
%s is the tunnel name. When dialing a tunnel, the tunnel is
already dialed.
%s is the tunnel name. The phase-2 tunnel negotiation is
complete.
%s is the tunnel name. When negotiating phase-1, the pre-
shared key did not match.
%s is the tunnel name. The device received an IKE request.
%s is the tunnel name. The device sent an IKE request.
615

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vantage report 3.0Vantage report 2.3

Table of Contents