ZyXEL Communications Vantage Report User Manual page 621

User guide
Hide thumbs Also See for Vantage Report:
Table of Contents

Advertisement

Table 281 Built-in Services Logs (continued)
LOG MESSAGE
SNMP port has been
changed to port %s.
SNMP port has been
changed to default
port.
Console baud has been
changed to %s.
Console baud has been
reset to %d.
DHCP Server on
Interface %s will not
work due to Device HA
status is Stand-By
DHCP Server on
Interface %s will be
reapplied due to
Device HA status is
Active
DHCP's DNS option:%s
has changed.
Set timezone to %s.
Set timezone to
default.
Enable daylight
saving.
Disable daylight
saving.
DNS access control
rules have been
reached the maximum
number.
DNS access control
rule %u of DNS has
been appended.
DNS access control
rule %u has been
inserted.
Vantage Report User's Guide
Appendix B ZyWALL USG Series and ZyWALL 1050 Log Descriptions
DESCRIPTION
An administrator changed the port number for SNMP.
%s is port number assigned by user
An administrator changed the port number for SNMP back to
the default (161).
An administrator changed the console port baud rate.
%s is baud rate assigned by user
An administrator changed the console port baud rate back to
the default (115200).
%d is default baud rate
If interface is stand-by mode for device HA, DHCP server can't
be run. Otherwise it has conflict with the interface in master
mode.
%s is interface name
When an interface has become the HA master, the DHCP
server needs to start operating.
%s is interface name
DHCP pool's DNS option support from WAN interface. If this
interface is unlink/disconnect or link/connect, this log will be
shown.
%s is interface name. The DNS option of DHCP pool has
retrieved from it
An administrator changed the time zone.
%s is time zone value
An administrator changed the time zone back to the default
(0).
An administrator turned on daylight saving.
An administrator turned off daylight saving.
An administrator tried to add more than the maximum
number of DNS access control rules (64).
An administrator added a new rule.
%u is rule number
An administrator inserted a new rule.
%u is rule number
621

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vantage report 3.0Vantage report 2.3

Table of Contents