Secure Remote Access - Client-To-Site (Ssl) - ZyXEL Communications Vantage Report User Manual

Chapter 6 Secure Remote Access
Each field is described in the following table.
Table 98 Report > Secure Remote Access > Client-to-Site (IPSec) > Top Users >
Drill-Down
LABEL
Display
graph
Protocol
Color
Sessions
% of Sessions
MBytes
Transferred
% of MBytes
Transferred
View Logs
Total
Back

6.3 Secure Remote Access - Client-to-Site (SSL)

SSL Secure Remote Access tunnels are HTTPS connections via the ZyXEL devices.
Only remote hosts can initiate SSL Secure Remote Access tunnels. Devices
authenticates remote users (by username and password) when they try to initiate
a SSL Secure Remote Access tunnel. The Secure Remote Access remote access
screens display statistics for remote users that use SSL Secure Remote Access
tunnels and have been authenticated.
242
DESCRIPTION
Select how you want the report to show statistics.
By Protocol - all services sent or received by the specific user.
By Destination - all destination hosts the user sent traffic to.
The graph displays the information in the table visually.
• Click the Pie View or the Bar View icon. You can specify the
Default Chart Type in System > General Configuration.
• Move your mouse over a slice in the pie chart or a bar in the bar
chart to display its identification.
• Click on a slice in the pie chart to move it away from the pie chart
a little.
This field displays the services most used by the selected user, sorted
by the amount of traffic for each one. By default, only the top 10
services are displayed. You can change the number of hosts to be
displayed through the TopN setting in Settings.
Each protocol is identified by its name.
This field displays what color represents each host in the graph.
This field displays the number of traffic events for each host.
This field displays what percentage each host's number of traffic
events makes out of the total number of traffic events for the selected
Secure Remote Access traffic.
This field displays how much traffic (in megabytes) went through
Secure Remote Access for each host.
This field displays what percentage of the selected Secure Remote
Access traffic was for each host.
Click this icon to see the logs that go with the record.
This entry displays the totals for the services above. By default, only
the top 10 services are displayed. You can change the number of
services to be displayed through the TopN setting in Settings.
Click this to return to the main report.
Vantage Report User's Guide