ZyXEL Communications Vantage Report User Manual page 39

Table 8 Device Window
SECTION DESCRIPTION
3
4
When you add a device to Vantage Report, you can specify the name, MAC
address, type, and any notes for the device. When you click on the device, this
information is displayed in the report and setting window (see
page 53). When you edit a device, however, you can only edit the name and the
notes. If you want to update the MAC address or device type, you have to delete
Vantage Report User's Guide
To move a device in the device tree,
• right-click on the device, and select Cut it. Then right-click the destination
folder and select Paste to.
To select which device is included in a report,
• click on the device.
To look at the basic information about a device,
• click on the device. The Device Information screen appears in the report
and setting window. (See
To edit the basic information about a device,
• right-click on the device, and select Edit Device. The Edit Device screen
appears in the device window. (See
To edit the basic information about a folder,
• right-click on the folder, and select Edit Folder. The Edit Folder screen
appears in the device window. (See
To remove a device from Vantage Report,
• right-click on the device, and select Delete Device. Vantage Report
confirms you want to delete it before doing so.
To remove a folder from Vantage Report,
• right-click on the folder, and select Delete Folder. Vantage Report
confirms you want to delete it before doing so.
To search for a device,
• type any part of the name, MAC address, or note and click the magnifying
glass. If a match is found, Vantage Report highlights the device in the
device window, but the report and setting window does not change. If a
match is not found, you get a message. You can click the magnifying glass
again to look for another match.
Chapter 3 The Web Configurator
Figure 11.)
Figure 11.)
Figure 11.)
Section 3.6.1 on
39