Failed Logins - ZyXEL Communications Vantage Report User Manual

Table 215 Report > Event > Login > Successful Login
LABEL
First .. Last
Go

11.2 Failed Logins

Use this screen to look at who tried to log in into the ZyXEL device (for
management or monitoring purposes) but failed. See
more information about the source data used by the report.
Note: To use the authentication screens, each ZyXEL device must record
authentication successes and failures in its log. See the User's Guide for each
ZyXEL device for more information. In most devices, go to Logs > Log
Settings, and make sure System Maintenance is enabled.
Click Report > Event > Login > Failed Login to open the Failed Login screen.
Figure 232 Report > Event > Login > Failed Login
Vantage Report User's Guide
DESCRIPTION
Click First, Last, or a specific page number to look at the records on
that page. Some choices are not available, depending on the number
of pages.s
Enter the page number you want to see, and click Go.
Chapter 11 Event
Section 2.6 on page 27 for
501