ZyXEL Communications Vantage Report User Manual page 581

To access this screen, click User Management > Account, and click a user name
to edit it or click the Add button to create a new account.
Figure 281 User Management > Account > Add/Edit User Account
Each field is described in the following table.
Table 261 User Management > Account > Add/Edit User Account
LABEL
User Name
Password
Confirm
E-mail
Group
Description
Apply
Reset
Cancel
Vantage Report User's Guide
DESCRIPTION
If you are editing an existing account, this field is read-only. It
displays the user name used to log in.
If you are creating a new account, enter the user name for the new
account. The user name must be 1-28 alphanumeric characters and/
or underscores( ) long, and it must begin with a letter or underscore.
_
If you are editing an existing account, this field displays the same
number of asterisks, regardless of the current password. You can
change the password.
If you are creating a new account or changing the password of an
existing account, enter the password for the new account. The
password must be 4-30 alphanumeric characters and/or
underscores( ) long.
_
Type the password again to verify it, if you are creating a new account
or changing the password of an existing account.
Enter the e-mail address associated with the user account. This
address is used for notifications (
passwords.
Select the group for the user account. The 'super' group can view all
devices, just like the
root
Enter the description for the user account.
Click this to save your settings and close the screen.
Click this to change the settings in this screen to the last-saved
values.
Click this to close the screen without saving any changes.
Chapter 15 User Management
only) and forgotten
root
account.
581