Customize The Column Fields - ZyXEL Communications Vantage Report User Manual

Chapter 4 Monitor

4.1.1 Customize the Column Fields

Click a folder and then click the Setting (
screen to open this screen. Use this screen to customize the column fields in the
Monitor (Folder) screen (see
the CPU usage, memory usage and the number of concurrent sessions by default
for devices under a folder.
Figure 24 Customize the Column Fields
Each field is described in the following table.
Table 16 Customize the Column Fields
LABEL
Monitor
Port
Direction
Interface Type
Interface
Service
Monitor Name
Add
#
Monitor Name
Monitor
66
Figure 23 on page
DESCRIPTION
Select a category to monitor device(s) under the folder.
This field is available when you select Port Usage in the Monitor
field. Select a port to monitor.
This field is available when you select Port Usage or Interface
Usage in the Monitor field. Select transmission (Tx), receiving (Rx)
or both (Tx+Rx) for the traffic direction to monitor.
This field is available when you select Interface Usage in the
Monitor field. Select the type of the interface to monitor.
This field is available when you select Interface Usage in the
Monitor field. The available options in this field may vary depending
on the Interface Type you select. Select an interface to monitor.
This field is available when you select Service Monitor in the
Monitor field. Select a service type to monitor.
Type up to 29 alphanumeric characters for the name of the monitor
item. Underscore (_) is allowed.
Click this to add the monitor item to the list table below and save the
changes to the Vantage Report.
This field displays the index number of the monitor item.
This field displays the name of the monitor item.
This field displays the category of the monitor item.
) icon at the top-right corner of the
65). Vantage Report monitors
Vantage Report User's Guide