ZyXEL Communications Vantage Report User Manual page 602

Appendix B ZyWALL USG Series and ZyWALL 1050 Log Descriptions
Table 272 User Logs (continued)
LOG MESSAGE
%s %s from %s has been
logged out (lease
timeout)
%s %s from %s has been
logged out (idle
timeout)
Console is put into
lockout
Address %u.%u.%u.%u is
put into lockout
Login attempt is made
on a lockout address
from %s
Failed %s login
attempt (reach the
maximum number of
user)
Failed %s login
attempt (reach the
maximum number of
simultaneous logon)
602
DESCRIPTION
The specified user was signed out by the device due to a lease
timeout.
1st %s: Administrator|Limited-Admin|User|Ext-User|Guest
2nd %s: username
3rd %s: service name (HTTP/HTTPS, FTP, telnet, SSH,
console)
NOTE field: %s means username.
The specified user was signed out by the device due to an idle
timeout.
1st %s: Administrator|Limited-Admin|User|Ext-User|Guest
2nd %s: username
3rd %s: service name (HTTP/HTTPS, FTP, telnet, SSH,
console)
NOTE field: %s means username.
Too many failed login attempts were made on the console port
so the device is blocking login attempts on the console port.
Too many failed login attempts were made from an IP address
so the device is blocking login attempts from that IP address.
%u.%u.%u.%u: the source address of the user's login
attempt
A login attempt came from an IP address that the device has
locked out.
%u.%u.%u.%u: the source address of the user's login
attempt
The device blocked a login because the maximum login
capacity has already been reached.
%s: service name
The device blocked a login because the maximum
simultaneous login capacity for the administrator or access
account has already been reached.
%s: service name
Vantage Report User's Guide