ZyXEL Communications Vantage Report User Manual page 627

Table 282 System Logs (continued)
LOG MESSAGE
Update the profile %s
has failed because WAN
interface was link-
down.
Update the profile %s
has failed because WAN
interface was not
connected.
Update the profile %s
has failed because IP
address of WAN
interface was empty.
Update the profile %s
has failed because
ping-check of WAN
interface has failed.
The profile %s has
been paused because
the HA interface of
VRRP status was
standby.
Update the profile %s
has failed because HA
interface was link-
down.
Update the profile %s
has failed because the
HA interface was not
connected.
Update the profile %s
has failed because IP
address of HA
interface was empty.
Update the profile %s
has failed because
ping-check of HA
interface has failed.
DDNS has been disabled
by Device-HA.
DDNS has been enabled
by Device-HA.
Disable DDNS has
succeeded.
Enable DDNS has
succeeded.
DDNS profile %s has
been renamed as %s.
Vantage Report User's Guide
Appendix B ZyWALL USG Series and ZyWALL 1050 Log Descriptions
DESCRIPTION
DDNS profile cannot be updated for WAN IP because WAN
iface is link-down, %s is the profile name.
DDNS profile cannot be updated for WAN IP because WAN
iface is PPP and not connected, %s is the profile name.
DDNS profile cannot be updated because the IP of WAN iface
is 0.0.0.0, 1st %s is the profile name.
DDNS profile cannot be updated because the ping-check for
WAN iface failed , %s is the profile name.
The profile is paused by Device-HA, because the VRRP status
of that HA iface is standby, %s is the profile name.
DDNS profile cannot be updated for HA IP address because HA
iface is link-down, %s is the profile name.
DDNS profile cannot be updated for HA IP address because HA
iface is PPP and not connected, %s is the profile name.
DDNS profile cannot be updated because the IP address of HA
iface is 0.0.0.0, %s is the profile name.
DDNS profile cannot be updated because the fail of ping-check
for HA iface, %s is the profile name
DDNS is disabled by Device-HA, because all VRRP groups are
standby.
DDNS is enabled by Device-HA, because one of VRRP groups
is active.
Disable DDNS.
Enable DDNS.
Rename DDNS profile, 1st %s is the original profile name, 2nd
%s is the new profile name.
627