ZyXEL Communications Vantage Report User Manual page 572

Hide thumbs Also See for Vantage Report:

Table of Contents

Chapter 14 System Setting

14.7.1.4 Service

Use this screen to configure an alert rule based on a service (such as Web, Mail

or FTP) used by the selected device(s).

Note: This condition filter only applies to both the ZLD and ZYNOS platform types.

Click System Setting > Rule-based Alert then either click on the link of the

existing Rule Name or click Add. Select Service in the Condition field.

The fields in the Filter section change to the following.

Figure 275 System Setting > Rule-based Alert > Add/Edit > Service

The fields above are described in the following table.

Table 255 System Setting > Rule-based Alert > Add/Edit > Service

Interface Type

Select Service in this field.

Select which service type you want to monitor. Choose one of the

Vantage Report User's Guide

Troubleshooting

Vantage report 3.0 Vantage report 2.3