ZyXEL Communications Vantage Report User Manual page 519

Each field is described in the following table.
Table 221 Report > Schedule Report > Summary > Add (Weekly Report)
LABEL
Report Type
Add
Destination E-mail
Address
E-mail Subject
E-mail Body
E-mail Attached
Files
Apply Template
Save Directory
Day to Submit
Report List
Apply
Reset
Cancel
Vantage Report User's Guide
DESCRIPTION
Choose Weekly Report in this field.
Enter the e-mail address(es) to which Vantage Report sends the
selected report(s) and click Add. Use a comma to separate each e-
mail address. Do not put a space after the comma. You can enter as
many valid e-mail addresses as you want.
Vantage Report provides an auto-complete feature in this field. As
you type, you can see a list of values for this field in other scheduled
reports next to the mouse. You can click on one to avoid typing the
rest of the value.
The list of e-mail addresses you enter appear here. Select one and
click Remove to delete that e-mail address from the list.
Enter the subject line in the e-mail message Vantage Report sends.
The subject must be 1-50 printable ASCII characters.
Vantage Report provides an auto-complete feature in this field. As
you type, you can see a list of values for this field in other scheduled
reports next to the mouse. You can click on one to avoid typing the
rest of the value.
Enter the text you want to appear in the main body of the e-mail
message Vantage Report sends. The body must be 1-255 printable
ASCII characters long.
Select this if you want Vantage Report to send the selected report(s)
as attachment(s). Vantage Report also saves the selected report(s)
on the Vantage Report server. If you do not select this, Vantage
Report only saves the selected report(s) on the Vantage Report
server. These report(s) are stored in
Vantage Report installation directory.
Select the check box and a template if you want to use a customized
report format.
This field is read-only. Vantage Report saves a copy of the selected
report(s) on the Vantage Report server. This field displays where the
copy is.
Select the day of the week to generate and send the selected
report(s).
Select which report(s) you want to generate and send in the e-mail
message. For some reports, you can select additional options. All the
bandwidth reports use the same direction setting.
Use the Select All check box at the bottom to select every report.
Refer to Figure 236 on page 512
Click this to save your settings and close the screen.
Click this to change the settings in this screen to the last-saved
values.
Click this to close the screen without saving any changes.
Chapter 12 Schedule Report
in the
data\scheduler
for the full view of Report List.
519