ZyXEL Communications Vantage Report User Manual page 623

Table 281 Built-in Services Logs (continued)
LOG MESSAGE
Access control rule %u
of %s was appended.
Access control rule %u
of %s was inserted.
Access control rule %u
of %s was modified.
Access control rule %u
of %s was deleted.
Access control rule %d
of %s was moved to %d.
SNMP trap can not be
sent successfully
Table 282 System Logs
LOG MESSAGE
Port %d is up!!
Port %d is down!!
%s is dead at %s
%s process count is
incorrect at %s
Vantage Report User's Guide
Appendix B ZyWALL USG Series and ZyWALL 1050 Log Descriptions
DESCRIPTION
A new built-in service access control rule was appended.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
An access control rule was inserted successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
An access control rule was modified successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
An access control rule was removed successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
An access control rule was moved successfully.
1st %d is the previous index .
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
2nd %d is current previous index.
Cannot send a SNMP trap to a remote host due to network
error
DESCRIPTION
When LINK is up, %d is the port number.
When LINK is down, %d is the port number.
A daemon (process) is gone (was killed by the operating
system).
1st %s: Daemon Name, 2nd %s: date+time
The count of the listed process is incorrect.
1st %s: Daemon Name, 2nd %s: date+time
623