ZyXEL Communications Vantage Report User Manual page 640

Appendix B ZyWALL USG Series and ZyWALL 1050 Log Descriptions
Table 288 Interface Logs (continued)
LOG MESSAGE
name=%s,status=%s,TxPk
ts=%u,
RxPkts=%u,Colli.=%u,Tx
B/s=%u,
RxB/s=%u,UpTime=%s
name=%s,status=%s,TxPk
ts=%u,
RxPkts=%u,Colli.=%u,Tx
B/s=%u,
RxB/s=%u
Interface %s start
dailing.
Interface %s connect
failed: Connect to
server failed.
Interface %s
connection terminated.
Interface %s
connection terminated:
idle timeout.
Interface %s connect
failed: MS-CHAPv2
mutual authentication
failed.
Interface %s connect
failed: MS-CHAP
authentication failed.
Interface %s connect
failed: CHAP
authentication failed.
Interface %s is
connected.
Interface %s is
disconnected.
Interface %s connect
failed: Peer not
responding.
Interface %s connect
failed: PAP
authentication failed.
640
DESCRIPTION
Port statistics log. This log will be sent to the VRPT server.
1st %s: physical port name, 2nd %s: physical port status, 1st
%u: physical port Tx packets, 2nd %u: physical port Rx
packets, 3rd %u: physical port packets collisions, 4th %u:
physical port Tx Bytes/s, 5th %u: physical port Rx Bytes/s,
3rd %s: physical port up time.
Interface statistics log. This log will be sent to the VRPT
server.
1st %s: interface name, 2nd %s: interface status, 1st %u
variable: interface Tx packets, 2nd %u variable: interface Rx
packets, 3rd %u: interface packets collisions, 4th %u:
interface Tx Bytes/s, 5th %u: interface Rx Bytes/s.
A PPP or aux interface started dailing to a server. %s:
interface name.
A PPTP interface failed to connect to the PPTP server. %s:
interface name.
A PPP or AUX connection will terminate. %s: interface name.
An idle PPP or AUX connection timed out.1%s: interface
name.
MS-CHAPv2 authentication failed (the server must support
mS-CHAPv2 and verify that the authentication failed, this does
not include cases where the servers does not support MS-
CHAPv2). %s: interface name.
MS-CHAP authentication failed (the server must support MS-
CHAP and verify that the authentication failed, this does not
include cases where the server does not support MS-CHAP).
%s: interface name.
CHAP authentication failed (the server must support CHAP and
verify that the authentication failed, this does not include
cases where the server does not support CHAP). CHAP:
interface name.
A PPP or AUX interface connected successfully. %s: interface
name.
A PPP or AUX interface disconnected successfully. %s:
interface name.
The interface's connection will be terminated because the
server did not send any LCP packets.
PAP authentication failed (the server must support PAP and
verify verify that the authentication failed, this does not
include cases where the server does not support PAP). %s:
PPP interface name.
Vantage Report User's Guide