ZyXEL Communications Vantage Report User Manual page 661

Table 310 802.1X Logs (continued)
LOG MESSAGE
User logout because of user
request.
Local User Database does not
support authentication method.
No response from RADIUS. Pls
check RADIUS Server.
Use Local User Database to
authenticate user.
Use RADIUS to authenticate user. The RADIUS server is operating as the
No Server to authenticate user.
Local User Database does not
find user`s credential.
Table 311 ACL Setting Notes
PACKET
DIRECTION
(L to W)
(W to L)
(D to L)
(D to W)
(W to D)
(L to D)
(L to L/ZW)
(W to W/ZW)
(D to D/ZW)
(L to WL)
(WL to L)
Vantage Report User's Guide
DESCRIPTION
A user logged out.
A user tried to use an authentication method that
the local user database does not support (it only
supports EAP-MD5).
There is no response message from the RADIUS
server, please check the RADIUS server.
The local user database is operating as the
authentication server.
authentication server.
There is no authentication server to authenticate a
user.
A user was not authenticated by the local user
database because the user is not listed in the local
user database.
DIRECTION DESCRIPTION
LAN to WAN ACL set for packets travelling from the LAN to the
WAN.
WAN to LAN ACL set for packets travelling from the WAN to the
LAN.
DMZ to LAN ACL set for packets travelling from the DMZ to the
LAN.
DMZ to WAN ACL set for packets travelling from the DMZ to the
WAN.
WAN to DMZ ACL set for packets travelling from the WAN to the
DMZ.
LAN to DMZ ACL set for packets travelling from the LAN to the
DMZ.
LAN to LAN/ ACL set for packets travelling from the LAN to the
Vantage Report LAN or the Vantage Report.
WAN to WAN/ ACL set for packets travelling from the WAN to the
Vantage Report WAN or the Vantage Report.
DMZ to DMZ/ ACL set for packets travelling from the DMZ to the
Vantage Report DM or the Vantage Report.
LAN to WLAN ACL set for packets travelling from the LAN to the
WLAN.
WLAN to LAN ACL set for packets travelling from the WLAN to
the LAN.
Appendix C ZyNOS Log Descriptions
661