Chapter 6 Secure Remote Access
Click on a specific user in Report > Secure Remote Access > Client-to-Site
(IPSec) > User Status to open this screen.
Figure 105 Report > Secure Remote Access > Client-to-Site (IPSec) > User Status
> Drill-Down
Each field is described in the following table.
Table 92 Report > Secure Remote Access > Client-to-Site (IPSec) > User Status >
Drill-Down
LABEL
Display
Direction
graph
226
DESCRIPTION
Select how you want the report to show statistics.
By Protocol - all services sent or received by the specific user.
By Destination - all destination hosts the user sent traffic to.
Select which direction of traffic, you want to view statistics.
Both - all Secure Remote Access traffic the devices sent or received.
Incoming - all traffic the devices received through Secure Remote
Access tunnel.
Outgoing - all traffic the devices sent out through Secure Remote
Access tunnel.
The graph displays the information in the table visually.
•
Click the Pie View or the Bar View icon. You can specify the
Default Chart Type in System > General Configuration.
•
Move your mouse over a slice in the pie chart or a bar in the bar
chart to display its identification.
•
Click on a slice in the pie chart to move it away from the pie chart
a little.
Vantage Report User's Guide