Intrusion Hits Severities - ZyXEL Communications Vantage Report User Manual

Hide thumbs Also See for Vantage Report:

Table of Contents

Chapter 9 Web Security

Table 187 Report > Web Security > Intrusion Hits > Top Destinations > Drill-Down

% of Intrusions

9.3.9 Intrusion Hits Severities

Use this report to look at the severity (significance) of intrusions by number of

intrusions. The levels of severity, in decreasing order of significance, are

Emergency (system is unusable), Alert (immediate action is required), Critical,

Error, Warning, Notice, Informational, and Debug.

Click Report > Web Security > Intrusion Hits > By Severity to open this

Figure 204 Report > Web Security > Intrusion Hits > By Severity

This field displays what kind of intrusion each intrusion signature is.

This corresponds to IDP > Signature > Attack Type in most ZyXEL

This field displays the number of intrusions of each intrusion signature

sent to the selected destination.

This field displays what percentage of all intrusions sent to the

selected destination belong to each intrusion signature.

Click this icon to see the logs that go with the record.

This entry displays the totals for the intrusion signatures above. If the

number of intrusion signatures sent to the selected destination is

greater than the maximum number of records displayed in this table,

this total might be a little lower than the total in the main report.

Click this to return to the main report.

Vantage Report User's Guide

Vantage report 3.0 Vantage report 2.3