Server Configuration Screen; Figure 97 System > General Configuration; Table 92 System > General Configuration - ZyXEL Communications VANTAGE REPORT - VERSION 2.3 User Manual

Vantage Report User's Guide
Figure 97 System > General Configuration
Each field is described in the following table.
Table 92 System > General Configuration
LABEL
Critical Log
Stored Log Days
Default Chart Type
DNS Reverse
Low Free Disk Mark
Apply
Reset

11.2 Server Configuration Screen

Note: Only the
203
DESCRIPTION
Select Enable if you want Vantage Report to start updating the critical log.
Select Disable if you want Vantage Report to stop updating the critical log. This
has no effect on existing critical log entries or on the Select Critical Logs
screen.
Enter the number of days that Vantage Report should keep logs and traffic
information. Vantage Report automatically deletes logs and traffic information
that are older than this. You cannot generate statistical reports or look at logs for
information older than this. This affects scheduled reports too because they can
only use whatever information is stored in Vantage Report. If you want
scheduled reports to have a complete set of information, you should set this field
accordingly.
Deleted information is saved in comma-separated files on the Vantage Report
server. These files have CSV extensions and are saved in
Report installation directory>\data\backup\db
Select the default chart type in statistical report screens.
Select Enable if you want Vantage Report to do reverse DNS lookups in
statistical reports. It has no effect in Log Viewer. In reverse DNS lookups,
Vantage Report looks for the domain name associated with IP addresses that it
displays. If Vantage Report finds the domain name, it displays the domain name
and the IP address in the field. If it does not find the domain name, it only
displays the IP address. This feature might increase the amount of time it takes
to display statistical reports, however.
When the amount of available disk space falls below this number of gigabytes,
Vantage Report sends a notification to the e-mail address (if any) for the
user account.
Click this to save your settings and close the screen.
Click this to change the settings in this screen to the last-saved values.
account can open this screen.
root
<Vantage
.
root
Chapter 11 System