ZyXEL Communications Vantage Report User Manual page 562

Chapter 14 System Setting
The fields are described in the following table.
Table 249 System Setting > Notification
LABEL
#
Notification Name
Level
Description
Total Count
Total Page
First .. Last
Go
Add
Delete
562
DESCRIPTION
This is the index number of a notification.
This is the name identifying the notification. You can edit the settings
of this notification by clicking this link. See
563 to see the Add/Edit screen for notifications.
This specifies the severity of the notification, which may be the
following:
• FATAL - System is unusable
• WARN - Warning conditions
• INFO - Informational messages
Severity labels are user-defined. You can determine how the severity
labels apply to each type of event when you are setting the
parameters for the notification file. You can set this in the Add/Edit
screen (see Section 14.6.1 on page
This shows the basic information for the notification.
This field displays how many rules are recorded.
This field displays how many screens it takes to display all the rules.
Click First, Last, or a specific page number to look at the rules on
that page. Some choices are not available, depending on the number
of pages.
Enter the page number you want to see, and click Go.
Click this to add the rule to the Vantage Report.
Select the check box(es) of the rule(s) you want to delete and then
click this button. Click OK in the confirmation dialog box.
Section 14.6.1 on page
563).
Vantage Report User's Guide