ZyXEL Communications Vantage Report User Manual page 76

Hide thumbs Also See for Vantage Report:

Table of Contents

Chapter 4 Monitor

Each field is described in the following table.

Table 21 Monitor > Network Traffic > Bandwidth > Interface Usage

Interface Name

Select a type of interfaces to display the throughput statistics of the

corresponding interface type. The available options may vary

depending on the selected device.

The possible options are Ethernet, VLAN, PPP, bridge, dial-

backup, 3G, Wireless.

Select an interface for which you want to display the throughput

statistics of the corresponding interface. The available options of this

field vary depending on the type of interface you selected in the

Interface field. See the corresponding device's User's Guide for more

information.

Select the direction of the traffic you want to show throughput

statistics in this graph.

Select Tx to display transmitted traffic throughput statistics and

select Rx to display received traffic throughput statistics in KBytes

per second. Alternatively, select Tx-Rx to display both.

Select the length of time for which Vantage Report should display

This field displays the date and time of the earliest traffic statistics in

the graph. The Vantage Report automatically calculates the start time

depending on the period you selected in the Period field.

This field displays the date and time of the latest traffic statistics in

The Refresh icon updates the information in the screen.

The graph shows how the status changes over time.

Y-axis (vertical): displays the amount of traffic through the selected

X-axis (horizontal): displays a date or time depending on the length

of time you choose in the Period field.

Vantage Report User's Guide

Troubleshooting

Vantage report 3.0 Vantage report 2.3