Network Security; Chapter 7 Network Security; Firewall Access Control; Top Users Blocked - ZyXEL Communications Vantage Report User Manual

Hide thumbs Also See for Vantage Report:

Table of Contents

This chapter discusses how to use reports to look at Denial-of-Service (DoS)

attacks that were detected by the ZyXEL device's firewall.

These screens display which users and packets were blocked based on the firewall

configuration.

Note: To look at firewall access control reports, each ZyXEL device must record

blocked packets and users in its log. See the User's Guide for each ZyXEL

device for more information. In most devices, go to Logs > Log Settings, and

make sure Access Control is enabled.

Use this report to look at the users from which the device blocked the most traffic.

Vantage Report User's Guide

Network Security

Vantage report 3.0 Vantage report 2.3