ZyXEL Communications Vantage Report User Manual page 631

Table 284 Device HA Logs (continued)
LOG MESSAGE
Sync failed: Remote
Firmware Version
Unknown
Master firmware
version should be the
same with Backup.
Update %s for %s has
failed.
Update %s for %s has
failed: %s.
Device HA has skipped
syncing %s since %s is
%s.
Device HA
authentication type
for VRRP group %s
maybe wrong.
Device HA
authenticaton string
of text for VRRP group
%s maybe wrong.
Device HA
authentication string
of AH for VRRP group
%s maybe wrong.
Retrying to update %s
for %s. Retry: %d.
Recovering to Backup
original state for %s
has failed.
Recovering to Backup
original state for %s
has succeeded.
One of VRRP groups has
became active. Device
HA Sync has aborted
from Master %s.
Master configuration
file does not exist.
Skip updating ZySH
Startup Configuration.
Vantage Report User's Guide
Appendix B ZyWALL USG Series and ZyWALL 1050 Log Descriptions
DESCRIPTION
The firmware version on the Master cannot be resolved to
check if it is the same as on the Master. A Backup device only
synchronizes from the Master if the Master and the Backup
have the same firmware versions.
The Backup and Master have different firmware versions. A
Backup device only synchronizes from the Master if the Master
and the Backup have the same firmware versions.
Updating a certain object failed when updating (AS/AV/IDP/
Certificate/System Configuration). 1st %s: The object to be
synchronized, 2nd %s: The feature name for the object to be
synchronized.
Updating a certain object failed when updating (AS/AV/IDP/
Certificate/System Configuration) due to some reason. 1st
%s: The object to be synchronized, 2nd %s: The feature
name for the object to be synchronized.
A certain service has no license or the license is expired, so it
was not synchronized from the Master. 1st %s: The object to
be synchronized, 2nd %s: The feature name for the object to
be synchronized, 3rd %s: unlicensed or license expired.
A VRRP group's Authentication Type (Md5 or IPSec AH)
configuration may not match between the Backup and the
Master. %s: The name of the VRRP group.
A VRRP group's Simple String (Md5) configuration may not
match between the Backup and the Master. %s: The name of
the VRRP group.
A VRRP group's AH String (IPSec AH) configuration may not
match between the Backup and the Master. %s: The name of
the VRRP group.
An update failed. Retrying to update the failed object again.
1st %s: The object to be synchronized, 2nd %s: The feature
name for the object to be synchronized, %d: the retry count.
An update failed. The device will try to recover the failed
update feature to the original state before Device HA
synchronizes the specified object.
Recovery succeeded when an update for the specified object
failed.
%s: IP or FQDN of Master
631