ZyXEL Communications Vantage Report User Manual page 534

Chapter 13 Logs
Click Logs > Log Receiver> By Device. The following screen displays.Logs >
Log Receiver > By Device. The following screen displays.
Figure 248 Logs > Log Receiver > By Device
Each field is described in the following table.
Table 231 Logs > Log Receiver > By Device
LABEL
Last ... Days
Settings
Device
534
DESCRIPTION
Use this field or Settings to specify what historical information is
included in the report. Select how many days, ending (and
including) today, you want to include.
When you change this field, the report updates automatically. You
can see the current date range in the title.
This field resets to its default value when you click a menu item in
the menu panel (including the menu item for the same report). It
does not reset when you open or close drill-down reports.
Use these fields to specify what historical information is included
in the report. Click the settings icon. The Report Display
Settings screen appears.
Select a specific Start Date and End Date. The date range can
be up to 30 days long, but you cannot include days that are older
than Store Log Days in System > General Configuration.
Click Apply to update the report immediately, or click Cancel to
close this screen without any changes.
This field displays the MAC addresses of the devices that sent logs
on the days you selected. They are sorted according to the
number of logs received by each, in descending order. Click a
device's MAC address to see details about the categories of logs
that the device sent to Vantage Report on the selected days.
Vantage Report User's Guide