ZyXEL Communications Vantage Report User Manual page 620

Appendix B ZyWALL USG Series and ZyWALL 1050 Log Descriptions
Table 281 Built-in Services Logs
LOG MESSAGE
User on %u.%u.%u.%u
has been denied access
from %s
HTTPS certificate:%s
does not exist. HTTPS
service will not work.
HTTPS port has been
changed to port %s.
HTTPS port has been
changed to default
port.
HTTP port has changed
to port %s.
HTTP port has changed
to default port.
SSH port has been
changed to port %s.
SSH port has been
changed to default
port.
SSH certificate:%s
does not exist. SSH
service will not work.
SSH certificate:%s
format is wrong. SSH
service will not work.
TELNET port has been
changed to port %s.
TELNET port has been
changed to default
port.
FTP certificate:%s
does not exist.
FTP port has been
changed to port %s.
FTP port has been
changed to default
port.
620
DESCRIPTION
HTTP/HTTPS/TELNET/SSH/FTP/SNMP access to the device was
denied.
%u.%u.%u.%u is IP address
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET
An administrator assigned a nonexistent certificate to HTTPS.
%s is certificate name assigned by user
An administrator changed the port number for HTTPS.
%s is port number
An administrator changed the port number for HTTPS back to
the default (443).
An administrator changed the port number for HTTP.
%s is port number assigned by user
An administrator changed the port number for HTTP back to
the default (80).
An administrator changed the port number for SSH.
%s is port number assigned by user
An administrator changed the port number for SSH back to
the default (22).
An administrator assigned a nonexistent certificate to SSH.
%s is certificate name assigned by user
After an administrator assigns a certificate for SSH, the
device needs to convert it to a key used for SSH.
%s is certificate name assigned by user
An administrator changed the port number for TELNET.
%s is port number assigned by user
An administrator changed the port number for TELNET back to
the default (23).
An administrator assigned a nonexistent certificate to FTP.
%s is certificate name assigned by user
An administrator changed the port number for FTP.
%s is port number assigned by user
An administrator changed the port number for FTP back to the
default (21).
Vantage Report User's Guide