ZyXEL Communications Vantage Report User Manual page 268

Chapter 6 Secure Remote Access
Each field is described in the following table.
Table 110 Report > Secure Remote Access > Xauth> Failed Login
LABEL
Last ... Days
Settings
Time
Login User
Source IP
Total
268
DESCRIPTION
Use this field or Settings to specify what historical information is
included in the report. Select how many days, ending (and including)
today, you want to include.
When you change this field, the report updates automatically. You can
see the current date range in the title.
This field resets to its default value when you click a menu item in the
menu panel (including the menu item for the same report). The field
does not reset when you open or close drill-down reports.
Use these fields to specify what historical information is included in
the report. Click the settings icon. The Report Display Settings
screen appears.
Select a specific Start Date and End Date. The date range can be up
to 30 days long, but you cannot include days that are older than
Store Log Days in System > General Configuration. Click Apply
to update the report immediately, or click Cancel to close this screen.
This column displays when the user last failed to log in. The entries
are sorted in chronological order.
This field displays the user name of a user that failed to log into one
of the device's Secure Remote Access tunnels.
Each user is identified by user name.
This is the IP address from which the user attempted to log into one
of the device's Secure Remote Access tunnels.
This entry displays the total number of users on the current page of
the report. If you want to see a different page of the report, type the
number of the page in the field.
Vantage Report User's Guide